| ¡¡ |
|
DEM015SD |
|
SINGLE PHASE
ELECTRONIC DIN-RAIL ACTIVE ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM015SD single phase electronic DIN rail
active energy meter is a kind of new style
single phase two wire active energy meter,
it adopt micro-electronics technique, and
imported large scale integrate circuit, use
advanced technique of digital and SMT
techniques, etc. It has its completely
independent intellectual property rights and
minimum size. It has already passed the test
of the international authority KEMA. The
meter completely accord with relevant
technical requirements of class 1 single
phase active energy meter stipulated in
international standard IEC 62053-21. It can
accurately and directly measure 50Hz or 60Hz
active energy consumption from single phase
AC electricity net. This meter has white
backlight source eight digits LCD displays
shows the active energy consumption. It has
following features: good reliability, small
volume, light weight, specious nice
appearance, convenient installation, etc.
This meter has already got the patent
certificate from China State Intellectual
Property Office at present. Patent
certificate NO. ZL 2006 3 0119356.3, any
other country patent certificate are in
assessing.
|
| ¡¡ |
 |
|
Functions and
features |
¡ñ
35mm standard DIN rail installation,
complying with standard DIN EN50022.
¡ñ
Single pole width (Modulus 17.5mm),
complying with standard DIN43880.
¡ñ
Standard configuration 7+1 digits display
(9999999.1kWh) by white backlight source
LCD. May select7+1 digits display
(999999.1kWh) without backlight source
general LCD, (product Configuration code is
SE).
¡ñ
Standard configuration pulse output passive
(polarity), May select distant pulse output
passive (nonpolarity). And contact with all
kind of AMR system conveniently, complying
with standard IEC 62053-31 and DIN 43864.
¡ñ
Bicolor LED instructions power supply state
(green) and signal of energy impulse (red).
¡ñ
Automatic detection the direction of the
flow of load current. And Instructions on
LED (when display HELP 1 on LCD, that is
meaning the direction of the flow of load
current reverse).
¡ñ
Single direction measurement single phase
two wire active energy consumption. It is
nothing with direction of the flow of load
current. Complying with standard IEC
62053-21.
¡ñ
Directly connect operation, there are two
types wiring you may select. Standard
configuration type S wiring, may select type
U wiring (Product Configuration code is UD).
¡ñ
Extension terminals cover, in order to
protect to use safety. |
| ¡¡ |
 |
|
Technical
parameters |
|
|
|
Model |
Accuracy |
Reference voltage(V) |
Current
specifications
(A) |
Starting Current |
Insulation
Performance |
|
DEM015SD |
Class 1 |
127
230 |
5(32) |
0.02 |
AC
voltage 4KV for 1 minute, 1.2/50US
waveform impulse voltage 6kV |
*If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
 |
|
Outer and mount
dimension |
.jpg) |
| ¡¡ |
 |
|
Wiring diagram
(Type S) |
.jpg) |
|
Terminal |
Note |
|
1 |
Inlet phase line |
|
4 |
Inlet neutral line |
|
3 |
Outgoing phase line |
|
6 |
Outgoing neutral line (Inlet from top, outlet
from bottom) |
|
20 and 21 |
Port of pulse output passive |
|
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
|