| ¡¡ |
|
DEM024SC |
| THREE
PHASE FOUR WIRE ELECTRONIC DIN-RAIL ACTIVE
ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM024SC three phase four wire electronic
DIN rail active energy meter is a kind of
new style three phase four wire electronic
active energy meter, it adopt
micro-electronics technique, and imported
large scale integrate circuit, use advanced
technique of digital and SMT techniques,
etc. It has its completely independent
intellectual property rights and minimum
size, and also a new three phase four wire
active energy meter. The meter completely
accord with relevant technical requirements
of class 1 three phase active energy meter
stipulated in international standard IEC
62053-21. It can accurate and directly
measure 50Hz or 60Hz active energy
consumption from three phase four wire AC
electricity net. It can display total energy
consumption by step motor type impulse
register. It has following features: good
reliability, small volume, light weight,
specious nice appearance, convenient
installation, etc. The patent certificate of
this meter is in assessing in the China
State Intellectual Property Office at
present.
|
| ¡¡ |
 |
|
Functions and
features |
¡ñ
35mm standard DIN- rail installation,
complying with standard DIN EN50022.
¡ñ
Four pole width (Modulus 17.5mm), complying
with standard DIN43880.
¡ñ
Standard configuration 6+1 digits display
(999999.1kWh) by step motor type impulse
register. May select 5+1 digits display
(99999.1kWh).
¡ñ
Standard configuration pulse output passive
(polarity), May select distant impulse
output passive (nonpolarity). And contact
with all kind of AMR system
conveniently, Complying with standard IEC
62053-31 and DIN 43864.
¡ñ
Four LED respectively instructions every
power supply state and signal of energy
impulse.
¡ñ
Automatic detection the direction of the
flow of load current. And Instructions on
individual LED
¡ñ
Single direction three components measure
three phase four wire active energy
consumption. It is nothing with direction of
the flow of load current. Complying with
standard IEC 62053-21.
¡ñ
Standard configuration type S wiring (Inlet
from bottom, outlet from top) for direct
connect operation, we can also choose
another type of wiring, and use CT (Product
Configuration code is CC) and PT & CT
(Product Configuration code is BC) for
operation.
¡ñ
Extension terminals cover, in order to
protect to use safety. |
| ¡¡ |
 |
|
Technical
parameters |
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
DEM024SC |
Class 1 |
3 x 127/220
3 x 230/400 |
5(100) |
0.02 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV | |
| *If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
 |
|
Outer and mount
dimension |
 |
| ¡¡ |
 |
|
Wiring diagram
(Type S) |
 |
|
Terminal |
Note |
|
L1 |
L1 phase line |
|
L2 |
L2 phase line |
|
L3 |
L3 phase line |
|
N |
Neutral line (Inlet from top, outlet from
bottom) |
|
26 and 27 |
Port of pulse output passive |
|
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
|