| ¡¡ |
|
DEM041CL |
| THREE
PHASE FORE WIRE ELECTRONIC MULTI-RATE
DIN-RAIL ACTIVE ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM041CL three phase four wire electronic
multi-rate DIN rail active energy meter is a
kind of three phase four wire two tariffs
(tariff conversion is controlled by timer
outside or similar equipment) active energy
meter, the meter completely accord with
relevant technical requirements of class 1
three phase active energy meter stipulated
in international standard IEC 62053-21. It
can accurate and directly measure 50Hz or
60Hz active energy consumption from three
phase four wire AC electricity net. This
meter has seven digits LCD displays shows
various consumption data and information. It
has following features: good reliability,
small volume, light weight, specious nice
appearance, convenient installation, etc.
This meter has already got the patent
certificate from China State Intellectual
Property Office at present. Patent
certificate NO. ZL 2006 3 0107349.1, any
other country patent certificate are in
assessing.
|
| ¡¡ |
|
|
|
Functions and
features |
¡ñ
35mm standard DIN rail installation,
complying with standard DIN EN50022. Or
front board installed (mounting holes center
distance 63 mm), users can choose any one by
themselves.
¡ñ
Ten pole width (Modulus 12.5mm), complying
with standard JB/T7121-1993.
¡ñ
Have two tariffs, and port of set the
tariff, input control voltage 0-90 Vac, set
up tariff F1, input control voltage 150-400
Vac, set up tariff F2, the tariff conversion
is controlled by timer outside or similar
equipment.
¡ñ
Standard configuration type of cycle
display, cycle display is 5 seconds. It can
display 6 data at most. Can select the data
which displayed. (Please specified when
ordering). The decimal median which
displayed can choose set one or two.
(Default two decimal, please specified when
ordering).
¡ñ
Use memory that is not loss easy, the data
can be kept forever after blackout.
¡ñ
There are a polarity port of pulse output
passive closed and a nonpolarity port of
pulse output passive distant, the output
rate is 10 or 100 imp/kWh (can select),
Complying with standard IEC 62053-31 and DIN
43864.
¡ñ
Eight LED instructions respectively power
supply state, signal of energy impulse, the
direction of the flow of load current, and
the tariff state just now.
¡ñ
Single direction three components measure
three phase four wire active energy
consumption. It is nothing with direction of
the flow of load current. Complying with
standard IEC 62053-21.
¡ñ
Standard configuration type S wiring (Inlet
from bottom, outlet from top) for direct
connect operation, we can also choose
another type of wiring, and use CT (Product
Configuration code is CN) and PT & CT
(Product Configuration code is CP) for
operation.
¡ñ
Standard configuration short terminals
cover, may select extension terminals cover,
in order to protect to use safety. (Product
Configuration code is CM). |
| ¡¡ |
|
|
|
Technical
parameters |
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
DEM041CL |
Class 1 |
3 x 127/220
3 x 230/400 |
5(30)
10(60)
20(100) |
0.02
0.04
0.08 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV | |
| *If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
|
|
|
Outer and mount
dimension |
 |
| ¡¡ |
|
|
|
Wiring diagram
(Type S) |
 |
|
Terminal |
Note |
|
L1, L2, L3 |
L1, L2, L3 phase line |
|
N |
Neutral line (Inlet from bottom, outlet from
top) |
|
15 and 16 |
Port of set the tariff, |
|
7 and 8 |
Port of pulse output passive closed |
|
3 and 4 |
Port of pulse output passive distant |
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
|
