| ¡¡ |
|
DEM231EI |
| THREE
PHASE FOUR WIRE ELECTRONIC DIN-RAIL REACTIVE
ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM231EI three phase four wire electronic
DIN rail reactive energy meter is a kind of
new style three phase four wire reactive
energy meter, it adopt micro-electronics
technique, and imported large scale
integrate circuit, use advanced technique of
digital and SMT techniques, etc. The meter
completely accord with relevant technical
requirements of class 2 three phase reactive
energy meter stipulated in international
standard IEC 62053-21. It can accurate and
directly measure 50Hz or 60Hz active energy
consumption from three phase four wire AC
electricity net. It can display total energy
consumption by step motor type impulse
register. It has following features: good
reliability, small volume, light weight,
specious nice appearance, convenient
installation, etc. This meter has already
got the patent certificate from China State
Intellectual Property Office at present.
Patent certificate NO. ZL 2006 3 0107349.1,
any other country patent certificate are in
assessing.
|
| ¡¡ |
 |
|
Functions and
features |
¡ñ
35mm standard DIN rail installation,
complying with standard DIN EN50022. Or
front board installed (mounting holes center
distance 63 mm), users can choose any one by
themselves.
¡ñ
Ten pole width (Modulus 12.5mm), complying
with standard JB/T7121-1993.
¡ñ
6 digits display (999999kWh) by step motor
type impulse register.
¡ñ
Standard configuration one port of pulse
output passive (polarity), May select
increase a distant port of pulse output
passive (nonpolarity), (Product
Configuration code is DF). And contact with
all kind of AMR system conveniently,
Complying with standard IEC 62053-31 and DIN
43864.
¡ñ
Four LED instructions respectively every
power supply state and signal of energy
impulse.
¡ñ
Automatic detection the direction of the
flow of load current. And Instructions on
individual LED
¡ñ
Single direction three components measure
three phase four wire reactive energy
consumption. It is nothing with direction of
the flow of load current. Complying with
standard IEC 62053-23.
¡ñ
May select two components measure three
phase three wire active energy (Product
Configuration code is EH) or two phase three
wire active energy (Product Configuration
code is EG)
¡ñ
Direct connect operation, type S wiring
(Inlet from bottom, outlet from top).
¡ñ
Short terminals cover, it is use for reduce
mounting space, and make mounting
conveniently. |
| ¡¡ |
 |
|
Technical
parameters |
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
DEM231EI |
Class 2 |
3 x 127/220
3 x 230/400 |
5(30)
10(60)
20(100) |
0.025
0.05
0.1 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV | |
| *If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
 |
|
Outer and mount
dimension |
 |
| ¡¡ |
 |
|
Wiring diagram
(Type S) |
 |
|
Terminal |
Note |
|
L1 |
L1 phase line |
|
L2 |
L2 phase line |
|
L3 |
L3 phase line |
|
N |
Neutral line (Inlet from bottom, outlet from
top) |
|
7 and 8 |
Port of pulse output passive |
|
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
|