| ¡¡ |
|
DEM313MF |
| SINGLE
PHASE ELECTRONIC FRONT BOARD INSTALLED
ACTIVE ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM313MF single phase electronic front board
installed active energy meter is a kind of
new style single phase two wire active
energy meter, it adopt micro-electronics
technique, and imported large scale
integrate circuit, use advanced technique of
digital and SMT techniques, etc. The meter
completely accord with relevant technical
requirements of class 1 single phase active
energy meter stipulated in international
standard IEC 62053-21. It can accurate and
directly measure 50Hz or 60Hz active energy
consumption from single phase AC electricity
net, it is use for setting indoor or setting
out door directly, and this meter
has seven digits LCD displays shows the
active energy consumption. And there is a
maintenance-free lithium batteries in it,
use for displaying power cut reading. It has
following features: good reliability, small
volume, light weight, specious nice
appearance, convenient installation, etc.
|
| ¡¡ |
|
|
|
Functions and
features |
¡ñ
Front board three fixed installation, the
cover is made of PC material which is
transparent and anti-UV molded overall, the
bottom and the terminal of the meter are
made of black glass fiber which can
fire-retardant and enhanced PC material, and
the
IP rating up to IP56. It has following
features: good weather
ability, anti-impact,
good insulation performance, specious
appearance, etc.
¡ñ
Standard configuration the bottom and the
terminal of the meter are closed by the
screw of the meter, may select the bottom
and the terminal of the meter are closed by
ultrasonic. (Please specified when
ordering).
¡ñ
Seven digits display LCD, standard
configuration 6+1 digits display
(999999.1kWh,). May select 5+2 digits
display (Please
specified when ordering).
¡ñ
There is a maintenance-free lithium
batteries in it, use for displaying power
cut reading.
¡ñ
Standard configuration one port of pulse
output passive (polarity),
May select increase a distant port of pulse
output passive
(nonpolarity). And contact with all kind of
AMR system conveniently,
Complying with standard IEC 62053-31 and DIN
43864.
¡ñ
Two LED instructions respectively power
supply state (green) and signal of energy
impulse (red).
¡ñ
Automatic detection the direction of the
flow of load current. And Instructions on
individual LED. (Only yellow energy impulse
signal when working, that is meaning the
direction of the flow of load current
reverse).
¡ñ
Single direction single component measure
single phase two wire active energy
consumption. It is nothing with direction of
the
flow of load current. Complying with
standard IEC 62053-21.
¡ñ
Direct connect operation, there are two
types wiring you may select. Standard
configuration type 1B wiring, may select
type 1A
wiring (Product Configuration code is DS).
¡ñ
Standard configuration extension terminals
cover, in order to protect to use safety,
may select short terminals cover. (Product
Configuration code is MC). |
| ¡¡ |
|
|
|
Technical
parameters |
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
DEM313MF |
Class 1 |
127
230 |
5(30)
10(60)
20(100) |
0.02
0.04
0.08 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV | |
| *If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
|
|
|
Outer and mount
dimension |
 |
| ¡¡ |
|
|
|
Wiring diagram
(Type 1B) |
 |
|
Terminal |
Note |
|
1 |
Inlet phase line |
|
3 |
Outgoing phase line |
|
4 |
Inlet neutral line |
|
6 |
Outgoing neutral line |
|
2 and 5 |
Port of pulse output passive |
|
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
¡¡ |
¡¡ |
|
|
