| ¡¡ |
|
DEM421AB |
| THREE
PHASE FOUR WIRE ELECTRONIC DIN-RAIL ACTIVE
AND REACTIVE INTEGRATION ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM421AB three phase three wire electronic
DIN rail active and reactive integration
energy meter is a kind of new style three
phase three wire active and reactive energy
meter, it adopt micro-electronics technique,
and imported large scale integrate circuit,
use advanced technique of digital and SMT
techniques, etc. The meter completely accord
with relevant technical requirements of
class 1 three phase active energy meter
stipulated in international standard IEC
62053-21 and class 2 three phase reactive
energy meter stipulated in international
standard IEC 62053-23. It can accurate and
directly measure 50Hz or 60Hz active and
reactive energy consumption from three phase
three wire AC electricity net, it can
display total energy consumption by step
motor type impulse register. This meter has
seven digits LCD displays shows active
energy. And there are far infrared and RS485
communication module in it. Contact with all
kind of AMR system conveniently. It has
following features: good reliability, small
volume, light weight, specious nice
appearance, convenient installation, etc.
This meter has already got the patent
certificate from China State Intellectual
Property Office at present. Patent
certificate NO. ZL 2006 3 0107349.1, any
other country patent certificate are in
assessing.
|
| ¡¡ |
 |
|
Functions and
features |
¡ñ
35mm standard DIN rail installation,
complying with standard DIN EN50022. Or
front board installed (mounting
holes center distance 63 mm), users can
choose any one by themselves.
¡ñ
Ten pole width (Modulus 12.5mm), complying
with standard JB/T7121-1993.
¡ñ
Type S wiring (Inlet from bottom, outlet
from top), use CT connect operation, may
select 27 CT ratio, the meter will read
directly after set, and needn¡¯t multiplied
by CT rate.
¡ñ
7 digits LCD display, 5+2
digits(99999.91kWh, Only when CT ratio 5:5A)
or 7 digits display. It is choose by the CT
ratio which is set.
¡ñ
Standard configuration one port of active
pulse output passive and one port of
reactive pulse output passive(polarity), The
output rate are 0.01, 0.1, 1, 10kWh or kvarh/Pulse.
Users can choose any one by themselves. May
select one port of active pulse output
passive and one port of reactive pulse
output passive (nonpolarity). And contact
with all kind of AMR system conveniently,
Complying with standard IEC 62053-31 and DIN
43864. (Please specified when ordering)
¡ñ
Standard configuration there are far
infrared and a port of RS485 communication
data, communication agreement complying with
standard DL/T645-1997. May select without
function of communication data. (Product
Configuration code is NB)
¡ñ
Five LED instructions power supply state
(line voltage L12 & L32) and signal of
active energy impulse and reactive energy
impulse and data communications state.
¡ñ
Automatic detection the direction of the
flow of load current. And instructions by
one LED.
¡ñ
Single direction two components measure
three phase three wire active and reactive
energy consumption. It is nothing with
direction of the flow of load current.
Complying with standard IEC 62053-21and IEC
62053-23.
¡ñ
Standard configuration short terminals
cover, may select extension terminals cover,
in order to protect to use safety. (Product
Configuration code is AE). |
| ¡¡ |
 |
|
Technical
parameters |
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
DEM421AB |
Class 1 |
3 x 220
3 x 400 |
CT/ 5A |
0.01 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV | |
| *If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
 |
|
Outer and mount
dimension |
 |
| ¡¡ |
 |
|
Wiring diagram
(Type S) |
 |
|
Terminal |
Note |
|
L1 |
L1 phase CT |
|
L2 |
Don't use |
|
L3 |
L3 phase CT |
|
¡¡ |
(Inlet from top, outlet from bottom) |
|
7 and 8 |
Port of active pulse output passive |
|
3 and 4 |
Port of reactive pulse output passive |
|
9 |
L1 phase line |
|
11 |
L2 phase line |
|
13 |
L3 phase line |
|
N |
Don't use |
|
5 and 6 |
Port of RS485 data communication |
|
1 and 2 |
CT ratio and stet SO output pulse rate |
|
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
|