| ¡¡ |
|
DEM421GB |
| THREE
PHASE FOUR WIRE ELECTRONIC DIN-RAIL ACTIVE
AND REACTIVE INTEGRATION ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM421GB three phase three wire electronic
DIN rail active and reactive integration
energy meter is a kind of new style three
phase three wire active energy meter, it
adopt micro-electronics technique, and
imported large scale integrate circuit, use
advanced technique of digital and SMT
techniques, etc. The meter completely accord
with relevant technical requirements of
class 1 three phase active energy meter
stipulated in international standard IEC
62053-21 and class 2 three phase reactive
energy meter stipulated in international
standard IEC 62053-23. It can accurate and
directly measure 50Hz or 60Hz active and
reactive energy consumption from three phase
three wire AC electricity net, it can
display total energy consumption by step
motor type impulse register. This meter has
seven digits LCD displays shows active
energy. And there are far infrared and RS485
communication module in it. Contact with all
kind of AMR system conveniently. It has
following features: good reliability, small
volume, light weight, specious nice
appearance, convenient installation, etc.
This meter has already got the patent
certificate from China State Intellectual
Property Office at present. Patent
certificate NO. ZL 2006 3 0107349.1, any
other country patent certificate are in
assessing
|
| ¡¡ |
 |
|
Functions and
features |
¡ñ
35mm standard DIN rail installation,
complying with standard DIN EN50022. Or
front board installed (mounting holes center
distance 63 mm), users can choose any one by
themselves.
¡ñ
Ten pole width (Modulus 12.5mm), complying
with standard JB/T7121-1993.
¡ñ
May select 6+1 digits display (999999.1kWh,
default) or 6+1 digits display, users can
choose any one by themselves form far
infrared or port of RS485 communication.
¡ñ
Standard configuration one port of active
pulse output passive and one port of
reactive pulse output passive(polarity), The
output rate are 0.01, 0.1, 1, 10kWh or kvarh/Pulse.
Users can choose any one by themselves. May
select one port of active pulse output
passive and one port of reactive pulse
output passive (nonpolarity). And contact
with all kind of AMR system conveniently,
Complying with standard IEC 62053-31 and DIN
43864. (Please specified when ordering)
¡ñ
There are far infrared and a port of RS485
communication data, communication agreement
complying with standard DL/T645-1997. May
select any other communication agreement.
¡ñ
Five LED instructions power supply state
(line voltage L12 & L32) and signal of
active energy impulse and reactive energy
impulse and data communications state.
¡ñ
Automatic detection the direction of the
flow of load current. And instructions by
one LED.
¡ñ
Single direction two components measure
three phase three wire active and reactive
energy consumption. It is nothing with
direction of the flow of load current.
Complying with standard IEC 62053-21and IEC
62053-23.
¡ñ
Standard configuration type S wiring (Inlet
from top, outlet from bottom), directly
connect operation, may select use CT
(Product Configuration code is FB) and PT&CT
(Product Configuration code is EB) for
operation.
¡ñ
Standard configuration short terminals
cover, may select extension terminals cover,
in order to protect to use safety. (Product
Configuration code is GE). |
| ¡¡ |
 |
|
Technical
parameters |
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
DEM421GB |
Class 1 |
3 x 220
3 x 400 |
5(30)
10(60)
20(100) |
0.02
0.04
0.08 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV | |
| *If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
 |
|
Outer and mount
dimension |
 |
| ¡¡ |
 |
|
Wiring diagram
(Type S) |
 |
|
Terminal |
Note |
|
L1 |
L1 phase line |
|
L2 |
L2 phase line |
|
L3 |
L3 phase line |
|
N |
Neutral line |
|
7 and 8 |
Neutral line
Port of active pulse output passive |
|
5 and 6 |
Port of RS485 data communication |
|
3 and 4 |
Port of reactive pulse output passive |
|
1 and 2 |
Port of stet SO output pulse rate |
|
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
|