| ¡¡ |
|
DEM421MC |
| THREE
PHASE FOUR WIRE ELECTRONIC DIN-RAIL ACTIVE
AND REACTIVE INTEGRATION ENERGY METER |
| ¡¡ |
 |
|
Application |
Model
DEM421MC three phase four wire electronic
DIN rail active and reactive integration
energy meter is a kind of new style three
phase four wire active energy meter, it
adopt micro-electronics technique, and
imported large scale integrate circuit, use
advanced technique of digital and SMT
techniques, etc. The meter completely accord
with relevant technical requirements of
class 1 three phase active energy meter
stipulated in international standard IEC
62053-21 and class 2 three phase reactive
energy meter stipulated in international
standard IEC 62053-23. It can accurate and
directly measure 50Hz or 60Hz active and
reactive energy consumption from three phase
four wire AC electricity net, it can display
total energy consumption by step motor type
impulse register. This meter has seven
digits LCD displays shows active energy. And
there is a maintenance-free lithium battery
in it, use for displaying power cut reading.
It has following features: good reliability,
small volume, light weight, specious nice
appearance, convenient installation, etc.
This meter has already got the patent
certificate from China State Intellectual
Property Office at present. Patent
certificate NO. ZL 2006 3 0107349.1, any
other country patent certificate are in
assessing.
|
| ¡¡ |
 |
|
Functions and
features |
¡ñ
35mm standard DIN rail installation,
complying with standard DIN EN50022. Or
front board installed (mounting holes center
distance 63 mm), users can choose any one by
themselves.
¡ñ
Ten pole width (Modulus 12.5mm), complying
with standard JB/T7121-1993.
¡ñ
7 digits LCD display, 6+1 digits(999999.
1kWh), may select 5+2 digits display.
(Please specified when ordering)
¡ñ
There is a maintenance-free lithium battery
in it, use for displaying power cut reading.
¡ñ
Standard configuration one port of active
pulse output passive and one port of
reactive pulse output passive(polarity), The
output rate are 0.01, 0.1, 1, 10kWh or kvarh/Pulse.
Users can choose any one by themselves. May
select one port of active pulse output
passive and one port of reactive pulse
output passive (nonpolarity). And contact
with all kind of AMR system conveniently,
Complying with standard IEC 62053-31 and DIN
43864. (Please specified when ordering)
¡ñ
Five LED instructions every power supply
state and signal of active energy impulse
and reactive energy impulse.
¡ñ
Automatic detection the direction of the
flow of load current. And instructions by
one LED.
¡ñ
Single direction three components measure
three phase four wire active and reactive
energy consumption. It is nothing with
direction of the flow of load current.
Complying with standard IEC 62053-21and IEC
62053-23.
¡ñ
Standard configuration type S wiring (Inlet
from top, outlet from bottom), directly
connect operation, may select use CT
(Product Configuration code is LC) and PT&CT
(Product Configuration code is KC) for
operation.
¡ñ
Standard configuration short terminals
cover, may select extension terminals cover,
in order to protect to use safety. (Product
Configuration code is MF). |
| ¡¡ |
 |
|
Technical
parameters |
|
Model |
Accuracy |
Reference
voltage (V) |
Current
specifications (A) |
Starting
current (A) |
Insulation
performance |
|
DEM421MC |
Class 1 |
3 x 220
3 x 400 |
CT/ 5A |
0.01 |
AC voltage 4kV for 1 minute,
1.2/50us waveform
impulse voltage 6kV | |
| *If you need
different reference voltage or current
specification, please advisory our sales. |
| ¡¡ |
 |
|
Outer and mount
dimension |
 |
| ¡¡ |
 |
|
Wiring diagram
(Type S) |
 |
|
Terminal |
Note |
|
L1 |
L1 phase line |
|
L2 |
L2 phase line |
|
L3 |
L3 phase line |
|
N |
Neutral line |
|
7 and 8 |
Port of active pulse output passive |
|
3 and 4 |
Port of reactive pulse output passive |
|
1 and 2 |
Port of stet SO pulse rate |
|
|
|
|
|
¡¡ |
¡¡
|
¡¡ |
|
|